Hiqh quality replacement Cooper S Front Brake Rotors (294 x 22mm) from Zimmerman. Offers similar performance to stock rotors - at a lower cost!
Fits the following Cooper S models:
2007-2013 R56 Cooper S Hardtop
2008-2014 R55 Cooper S Clubman
2009-2015 R57 Cooper S Convertibles
2012-2015 R58 Cooper S Coupe
2012-2015 R59 Cooper S Roadster
|STOCK ROTOR SIZES|
|COOPER||280 x 22mm||259 x 10mm|
|COOPER S||294 x 22mm|
Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.
Sold per pair. Comes with anti-corrosion coating.
For a listing of all Zimmerman rotors, see G2NMB2070-P.
For a listing of factory replacement rotors, see G2NMB3000.
If you need to replace the set screw that holds the rotor in place, see NMB7603.
If your brake wear warning light is illumninated, see replacement sensors.
ZIMMERMANN - Quality begins with the material.
Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.
Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.
Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.
In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.
The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.
[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
For High Performance Brake Fluids, see the following: